AdsPower vs ClonBrowser: Which Anti-Detect Browser Wins?
Nov 18, 2026
AdsPower creates isolated browser profiles with unique digital fingerprints, but even the best anti-detect setup can fail if a proxy leaks, a timezone mismatches, or a WebRTC setting exposes your real IP. BrowserScan fills that gap. It is a free, browser-based diagnostic platform that shows exactly what websites see when your AdsPower profile connects. This guide walks through why the two tools belong together, how to run effective checks, and how to fix the most common issues the tests reveal.

BrowserScan product interface.
AdsPower is a control layer. It lets you define fingerprints, assign proxies, and automate multi-account workflows. BrowserScan is a measurement layer. It reports whether those configurations actually hold up under inspection.
Think of it like a car dashboard. AdsPower is the engine and steering system; BrowserScan is the gauge cluster telling you whether the engine is overheating or a tire is losing pressure. You would not drive a fleet of accounts without checking the gauges.
This combination solves three recurring problems for multi-account operators:
For a deeper look at how AdsPower builds fingerprints and why consistency matters, see AdsPower vs MuLogin vs Maskfog: How to Choose an Anti-Detect Browser in 2026.

How to Use AdsPower with BrowserScan: Setup & Workflow - What BrowserScan Actually Tests.
Before running a workflow, it helps to understand what the tool measures. BrowserScan performs several categories of checks inside your active browser session:
This breadth makes BrowserScan more useful than single-purpose tools. Instead of running three different sites to check a fingerprint, an IP, and a WebRTC leak, you get one consolidated report.
Here is a repeatable workflow you can use for every new profile and for periodic audits of existing ones.
Launch AdsPower and either create a new browser profile or open an existing one. When creating a profile, pay attention to these settings:
If you are unsure which proxy type fits your use case, the Top 10 Residential Proxy Networks 2026: Tested & Ranked guide can help you choose.
With the AdsPower profile running, navigate to the BrowserScan website directly inside that profile window. Do not open BrowserScan in your regular browser — the whole point is to test the isolated environment, not your daily driver.
The site automatically runs a full fingerprint scan. Within a few seconds, you will see:
Scroll to the IP section and confirm three things:
If the IP is wrong, the proxy is not routing correctly. Check the proxy credentials in AdsPower, test the proxy in a plain browser, or contact your proxy provider.
Even when the public IP looks correct, WebRTC can expose your real network address. BrowserScan has a dedicated WebRTC leak test. Run it and look for any local IP addresses (like 192.168.x.x) or your real public IP appearing alongside the proxy IP.
If a leak appears, return to AdsPower and change the WebRTC setting for that profile. The "Replace" mode substitutes the proxy IP into WebRTC requests, while "Disable" turns WebRTC off entirely. Re-run the test after changing the setting.
Look at the fingerprint section for mismatches. Common issues include:
AdsPower lets you adjust each of these parameters per profile. Make changes, then refresh BrowserScan to confirm the new values appear correctly.
For teams managing dozens or hundreds of profiles, create a simple verification log. Record the profile name, date, proxy used, BrowserScan authenticity score, and any issues found. This creates an audit trail and helps you spot patterns — for example, a specific proxy provider that consistently fails WebRTC checks.

How to Use AdsPower with BrowserScan: Setup & Workflow - Practical Example: Setting Up a Facebook Ads Profile.
Here is how the workflow looks in a real scenario. Suppose you are preparing an AdsPower profile for a Facebook Ads account targeting the US market.
Setup in AdsPower:
FB-Ads-US-01BrowserScan verification:
FB-Ads-US-01.Result: The profile is ready for use. Repeat this check before launching a new campaign or after any AdsPower update.
Symptom: BrowserScan shows your actual home or office IP in the WebRTC section, even though the proxy IP appears correct elsewhere.
Fix: In AdsPower, open the profile settings and change WebRTC mode to "Replace" or "Disable." Re-test. If the leak persists, check whether any browser extensions in the profile are overriding WebRTC behavior.
Symptom: The IP address matches the proxy, but the DNS resolver shown by BrowserScan belongs to your local ISP.
Fix: Ensure the proxy in AdsPower is configured to handle DNS requests (most SOCKS5 proxies do this automatically). If you are using an HTTP proxy, consider switching to SOCKS5. You can also set custom DNS servers in the profile settings. For more on this topic, see DNS Leaks Explained: Secure AdsPower Profiles with the Right Proxy.
Symptom: BrowserScan reports a very low similarity score or flags the fingerprint as highly unique.
Fix: Review which signals are unusual. Common culprits include rare screen resolutions, non-standard font sets, or mismatched Canvas/WebGL outputs. In AdsPower, reset those parameters to match common device profiles, or use the randomization feature with conservative settings.
Symptom: BrowserScan's proxy detection labels your IP as a datacenter or VPN address, even though you purchased a residential proxy.
Fix: This usually indicates a proxy quality issue. Test the same proxy in a clean browser. If it is still flagged, contact your provider. For high-stakes accounts, switch to a verified residential or mobile proxy. The Proxy-Cheap Review 2026: Pricing, Features & Verdict covers one budget-friendly option worth evaluating.
Symptom: BrowserScan shows the correct proxy IP but a timezone that belongs to a different region.
Fix: In AdsPower, manually set the timezone to match the proxy's geolocation. Do not rely on automatic detection, which can fail when proxies route through intermediate servers.
BrowserScan is not the only option, but it fills a specific niche. Here is how it compares to common alternatives:
| Tool | Fingerprint Analysis | IP/Proxy Check | WebRTC Leak Test | Port Scanner | Speed Test |
|---|---|---|---|---|---|
| BrowserScan | Yes, with score | Yes | Yes | Yes | Yes |
| AmIUnique | Yes, detailed | No | No | No | No |
| Pixelscan | Yes, advanced | Partial | Yes | No | No |
| BrowserLeaks | Yes, technical | Partial | Yes | No | No |
| Whoer.net | Yes | Yes | Yes | No | Yes |
BrowserScan's advantage is the all-in-one nature. For AdsPower users who want to verify a profile quickly without juggling multiple tabs, it is the most efficient choice. The authenticity score also gives a quick benchmark you can track over time.
The frequency depends on your risk level and workflow:
For teams using automation, you can integrate these checks into your workflow. AdsPower's Local API works with Selenium and Puppeteer, which means you could script a routine that opens each profile, loads BrowserScan, and captures the results. If you are already using AdsPower for scraping or automation, the How to Use AdsPower with Puppeteer: Full Setup Guide provides relevant code patterns.
BrowserScan is a diagnostic tool, not a protection layer. It will not anonymize you, hide your IP, or prevent tracking on its own. It only reports what is visible. The actual protection comes from AdsPower's fingerprint management and your proxy configuration.
Also, fingerprint detection methods evolve. A profile that passes BrowserScan today might be flagged tomorrow by a platform using newer techniques. Regular re-testing and staying current with AdsPower updates are essential.
Finally, BrowserScan's speed test results depend on server location and current network load. Treat those numbers as rough indicators rather than precise benchmarks.
Yes. BrowserScan runs entirely in the browser, so it works inside any AdsPower profile. Open the BrowserScan site within the profile window to test that specific environment.
BrowserScan can reveal IP leaks through WebRTC or DNS if those are not properly configured. This is exactly why you should test: it shows what a website would see, including any leaks your proxy setup might be exposing.
Scores above 90% generally indicate a well-configured profile. Scores below 80% suggest noticeable inconsistencies. However, the score is a guideline — always review the individual signals rather than relying on the number alone.
AdsPower manages fingerprints, but it does not independently verify how external sites perceive those fingerprints. BrowserScan provides that external validation. The two tools serve different functions and work best together.
Yes. BrowserScan's core tools — fingerprint analysis, IP lookup, WebRTC leak test, port scanner, and speed test — are all free and require no installation or account.
Yes, with some effort. AdsPower's Local API supports automation via Selenium or Puppeteer. You can script a routine that opens each profile, navigates to BrowserScan, and captures key results for logging.
AdsPower and BrowserScan solve different halves of the same problem. AdsPower gives you control over browser fingerprints and proxy routing; BrowserScan tells you whether that control is actually working in the real world. By making BrowserScan checks a standard part of your profile setup and maintenance routine, you catch leaks and inconsistencies before platforms do — and that is the difference between a stable multi-account operation and a wave of unexpected bans.
Start with a single profile. Create it in AdsPower, open BrowserScan inside it, and work through the six-step verification process above. Once the workflow feels natural, apply it to every profile you manage. The few minutes per profile is a small price for the accounts you protect.
For more on choosing the right anti-detect browser for your needs, see AdsPower vs Octo Browser vs BitBrowser: 2026 Tested.